Shank-type gear shaping cutter with DIN 5482
2021-10-18 13:41:41
jiangxingTools
235
Shank-type gear shaping cutter with DIN 5482
Tooth profile to DIN5482 standard
Module: m1.6-m2.25
Number of teeth: Z5-20
Pressure angle: 30°
Morse taper: Mk2, Mk3
Shank type gear shaper cutters are full form generated however small the pitch circle diameter (PCD), although the strength of the cutter produced is the limiting factor. The strength and rigidity of shank type cutters is greatly improved by the Jiangxing Tools ribbing method and is especially advised for those of small PCD.
相關文章
-
Module, DP and CP for Spur Gear Hobs
Module, DP and CP for Spur Gear HobsIn most English-speaking countries, diametral pitch and circular... - HSS Precision Gear Shaper Cutters
- PA20° Pre-shaving Gear Hobber with Module m2.5
- PA20° Module m3 Standard Involute Gear Hob
- PA20° PCD 100mm Pre-shaving Gear Shaper Cutter with Module m1.25~m6
- Spray Forming Material HSF825K, HSF835
- RS60 Roller Chain Sprocket Hob with Pitch 19.05 x Roller Dia. 11.91
