Module, DP and CP for Spur Gear Hobs
2021-11-26 10:16:31
jiangxingTools
353
Module, DP and CP for Spur Gear Hobs
In most English-speaking countries, diametral pitch and circular pitch are used instead of the module.
lt is best to convert the above values into module and to proceed with the calculated module in the usual way.
The equations for the conversion into module are:
m = 25.4 / DP
m = 25.4 · CP / 3.1416
You are welcome to visit our new website for more details on gear cutting tools and gear hobs.
相關文章
-
Timing Pulley Hob for (AT.)D.T AT20
Timing Pulley Hob for (AT.)D.T AT20timing belt profile: (A.T)D.Tbelt type: AT20common range: 15-20T,... - ?PA30° PCD 38mm Shank Type Gear Shaper Cutter with Module m1.75~m4
- PA20° DIN3972 Standard DP Gear Hob
- GB STD Bowl Shape Straight Tooth Gear Shaper Cutter
- DP Bowl-Shape PCD100mm Straight Tooth Pinion Cutter
- HSS Precision Gear Shaper Cutters
- PA30° DIN5480 Involute Spline Gear Hob with Module m1.5
