Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
261
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相關文章
-
PA30° DIN5480 Involute Spline Hob Cutter with Module m3
PA30° DIN5480 Involute Spline Hob Cutter with Module m3Tooth profile：GB, DIN5480 standardMaterial：HS... - Manufacturing and Testing Facilites of Hobs
- PA20° Profile DIN3972 Standard Gear Hobbing Tool with Module m3.25
- Effect of Hob Sharpening Errors
- PA20° Profile DIN3972 Standard Gear Hobbing Tool with Module m5.5
- Helical Gear Shaper Cutter
- PA20° Profile DIN3972 Standard Pre-grinding Hob with Module m3.25
