Profile Modifications for Gear Hobs
2022-01-03 08:25:06
jiangxingTools
130
Profile Modifications for Gear Hobs
The purpose of the profile modification is to reduce or avoid the interference when the teeth roll into mesh while a gear pair is running under load,
To decide on the basic profile of the hob, the complete tooth cutting data or workpiece drawing are necessary.
The size of the profile modification produced depends, similarly as with tip edge chamfer, on the number of teeth.
相關文章
-
?PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16
PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16Material：HSS M2,M35, M42, S390Mo... - HSS Helical Type Gear Shaper Cutter
- PA20° PCD 240mm β15° Disk Type Conventional Gear Shaving Cutter with Module m2~m8
- PA20° Profile DIN3972 Standard Gear Hobbing Cutter with Module m7
- Broaches
- PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
