Gear Shaving Machine
2022-03-16 14:43:21
jiangxingTools
149
Gear Shaving Machine
Gear shaving machine is a metal cutting machine for gear finishing. Gear shaving machine is suitable for finishing unhardened gears, usually used for shaving straight or helical gears whose hardness is not greater than HRC48 after hobbing or shaping, and machining inner gears by adding accessories. The maximum diameter of the machined gear is 5 meters, but it is most widely used in the medium size gear shaveing machines under 500 mm. The shaving precision is 7-6 (JB179-83), and the surface roughness is 0.63 ~ 0.32 micron.
相關文章
-
PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5
PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5Tooh profile is according to... - Shank Type Worm Gear Hob with Module m6
- ?PA30° PCD 50mm Bell Type Pinion Cutter with Module m3.5-m5
- PA30° DIN5480 Involute Spline Hob with Module m4
- PA20° Module m5.5 Standard Involute Hob Cutter
- STD Involute Spline Hob Cutter with Profile DIN 5480
- Tooth Profile for Involute Spline Hobs
