Hob Materials
2021-08-07 09:27:43
jiangxingTools
269
Hob Materials
the standard material is the high speed steel EM2, EM35 and EM42. For higher cutting speeds and feeds, high-alloy high-speed steels ASP2030, ASP2052, S390, MC90 are used which were produced with the powder-metallurgy process.
An increase in performance over PM-HSS can be achieved by the new speedcore material. Speedcore is made from cobalt, molybdenum and carbon-free iron. This combination enables a marked increase of the read hardness of the cutting material compared to traditional PM-HSS substrates.
Carbide materials are used for high-performance milling in wet and dry machining or for skiving hobs.
相關文章
-
Heavy duty roughing hobs with involute gear froms
Heavy duty roughing hobs with involute gear fromsfor spur and helical gears to module pitch20° press... - PA20° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m2.75
- PA20° Module m2 Standard Involute Gear Hob
- PA20° Standard Involute Gear Milling Cutter with Module m6.5
- PA20° Profile DIN3972 Standard Gear Cutter Hob with Module m3.5
- PA20° Standard Gear Milling Cutter with Module m1
- PA30° DIN5480 Involute Spline Hob Cutter with Module m3
