Information required when ordering shaper cutters
2021-08-27 11:21:59
jiangxingTools
213
Information required when ordering shaper cutters
1, Quantity of shaper cutter
2, Type of cutter - Disc, Shank or Hub with
3, Bore diameter or type of shank fitting required.
4, Pitch - (DP, CP or Module)
5, Pressure Angle.
6, PCD - Approximate pitch circle diameter or number of teeth.
7, Material.
8, Coating.
9, Complete geara or detailed component drawings should be supplied when ordering non-standard gear shaping tools.
相關文章
-
PA20° Inserted Blade Gear Hob with Module m24
PA20° Inserted Blade Gear Hob with Module m24Material：HSS M2, M35Tooth profile is according to DIN39... - PA20° PCD 180mm β15° Disk Type Gear Shavng Cutter with Module m1.25~m6
- PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m1
- Information required when ordering gear hobs
- Gashes for Involute Gear Hob
- Gear hobs for synchroflex timing belt pulleys
- PA20° PCD 125mm Disk Type Gear Shaping Cutter with Module m4~m8
